Expansion plug S

The fischer expansion plug S is the original. The plastic fixing is made from high-quality nylon and is particularly robust. The fischer expansion plug S is offered for fixings in drill diameters from 4 to 20 mm and therefore can be used in a variety of applications. The lean plug geometry simplifies installation. The characteristic anti-rotation locks prevent the plug from rotating as the screw is tightened. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing light objects in concrete and solid masonry.

GET A QUOTE

Share your details, and our experts will get back to you shortly.

ADVANTAGES

The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation.
The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety.

APPLICATIONS

Pictures
Lighting
Skirting
Light shelves
Mirror cabinets
Letter boxes
Motion detectors
Information boards
Curtain rails
Electrical installations

INSTALLATION GUIDE

The expansion plug S is suitable for pre-positioned and push-through installation.
When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material.
The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter.
Suitable for wood and chipboard screws.
The edge distance must be at least one plug length.
For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge.